Revision: C
Finish: Silver
Company: DRS Technologies
Application: SILVER PLATE PER ASTM B700. TYPE 1, GRADE A, B, C
Appearance: Varies
Plate Thickness: SILVER PLATE SHALL NOT BE LESS THAN 0.0002″
Strike Thickness: None specified
Notes: INSULATE WITH HYSOL DK 19 (POWDER COATING)
DIMENSION TOLERANCES (LINEAR AND RADIAL) ON INSULATION SHALL BE AS FOLLOWS: HATCHED AREAS MAY EXPAND UP TO .250 AND SHALL NOT SHRINK LESS THAN .060 OF THE SPECIFIED DIMINSIONS.
ALL THRU HOLES NOT MASKED SHOULD BE PLUGGED PRIOR TO INSULATING. INSULATION IN HELICAL INSERTS IS UNACCEPTABLE. INSULATION IN THRU HOLES IS ACCEPTABLE IF DRAWING TOLERANCES ARE MET.
POWDER COAT NON-HATCHED AREAS WITH HYSOL DK 19.THICKNESS SHALL BE .010 TO .020 INCHES AFTER CURE. POWDER COATING IS APPLIED AFTER SILVER PLATING.
NOTE: NO PART IS TO BE FULLY POWDER COATED. IF THERE IS NO HATCHING IT IS LIKELY THAT PART HAS NO POWDER COATING. A NOTE STATING: “DO NOT POWDER COAT THIS PART” SHOULD BE ON THE DRAWING. IF THE PART SHOWS NO HATCHING AND DOES NOT HAVE THE APPROPRIATE NOTE CONTACT THE DRS BUYER.
The information provided within the Advanced Plating Technologies’ database is for reference only and is not intended to be a comprehensive summary of any specification’s content. Rather the database was designed to provide a brief summary of the specification’s subject matter to provide a sound context of the specification’s contents and engineering purpose. Advanced Plating Technologies cannot guarantee that the specifications contained therein are the most current revisions. In addition, Advanced Plating has no affiliation with any of the organizations, agencies or companies contained within the database. We hope you find the APT specification database a useful online resource and value any feedback you may have. Although the data provided in this database has been obtained or adapted from sources that are believed by us to be reliable, no warranty expressed or implied is made by us regarding the accuracy, adequacy, completeness, reliability or usefulness of any data. The data is provided strictly for reference purposes. Only our standard product and service warranties apply to finished goods supplied by Advanced Plating Technologies. To the extent that any third party company or agency is identified as a data source, Advanced Plating Technologies is not associated with such company or agency and that such company or agency is not identified for purposes of advertising, endorsement or recommendation by APT. If you find any errors or omissions in the data, we encourage you to report them to us.