Silver Plating Services per AMS (SAE) AMS 2412G

silver electrolytic plating Thank you for visiting the Advanced Plating Technologies Specification Database. Below is a technical summary of specification AMS 2412G from AMS (SAE) for Silver. For more information on our full line of Silver services please visit our silver plating services page. You can also request a quote or contact a member of our technical sales team for more information.

Revision: 36251
Finish: Silver
Company: AMS (SAE)
Application: The deposit shall be not less than 99.9% silver determined by a methods acceptable to the purchaser.
Appearance: Varies
Plate Thickness: per 3.4.1 – Thickness of silver shall be as specified on the drawing, determined on representative parts or on test specimens as in 4.3.3 in accordance with any of the following methods as applicable: ASTM B487, ASTM B499, ASTM B504, ASTM E376, or other method acceptable to the cognizant organization. per Where silver flash only is specified, plate thickness shall be approximately 0.0001 inch (2.5um).
Strike Thickness: per 3.2.1 – Silver shall be plated over a preliminary plating of copper 0.0005″ maximum. The copper strike may be omitted in plating copper and copper alloys, except for copper alloys containing zinc in quantities of 30% or more by weight. A nickel flash shall be used before the copper strike when plating corrosion-resistant steels.

Back to Spec Database


The information provided within the Advanced Plating Technologies’ database is for reference only and is not intended to be a comprehensive summary of any specification’s content.  Rather the database was designed to provide a brief summary of the specification’s subject matter to provide a sound context of the specification’s contents and engineering purpose. Advanced Plating Technologies cannot guarantee that the specifications contained therein are the most current revisions.  In addition, Advanced Plating has no affiliation with any of the organizations, agencies or companies contained within the database.  We hope you find the APT specification database a useful online resource and value any feedback you may have.

Although the data provided in this database has been obtained or adapted from sources that are believed by us to be reliable, no warranty expressed or implied is made by us regarding the accuracy, adequacy, completeness, reliability or usefulness of any data.  The data is provided strictly for reference purposes.  Only our standard product and service warranties apply to finished goods supplied by Advanced Plating Technologies.  To the extent that any third party company or agency is identified as a data source, Advanced Plating Technologies is not associated with such company or agency and that such company or agency is not identified for purposes of advertising, endorsement or recommendation by APT.  If you find any errors or omissions in the data, we encourage you to report them to us.